Exhaust

Hooker Exhaust Coupler Clamps 2-1/2 SS 2pk - HKR41172

Exhaust Clamp - Band Clamp - 2-1/2 in Diameter - 3 in Wide Band - Stainless - Natural - Pair

Flowtech Pro-Stang 5.0L Starter Tubes - 2.5in - FLT53609

Intermediate Pipes - Pro-Stang Starter Tube - 2-1/2 in Diameter - 3-Bolt Flange - Steel - Aluminized - Small Block Ford - Mustang 1986-93 - Pair

Heatshield Products Hot Rod Sleeve 3/4 in id x 10 ft - HSP204014

Hose and Wire Sleeve - Hot Rod Sleeve - 3/4 in ID - 10 ft Roll - 1100 Degrees - Fiberglass - Black - Each

Vibrant Performance S/S 2-1/4in 90 Deg Bend w/ 3-3/8in Radius

Exhaust Bend - 90 Degree - Mandrel - 2-1/4 in Diameter - 3-3/8 in Radius - 4 x 12 in Legs - 16 Gauge - Stainless - Each

Vibrant Performance Pie Cuts Stainless Steel 3.0in 6 Pieces

Exhaust Bend - Pie-Cuts - 15 Degree - 3 in Diameter - 2.72 in Radius - Stainless - Natural - Set of 6

Vibrant Performance 180 Degree Mandrel Bend 1.50in O.D. 16 Gauge SS

Exhaust Bend - 180 Degree - 1-1/2 in Diameter - Mandrel - 2-1/4 in Radius - 6 in Legs - Stainless - Natural - Each

.88in ID Firesleeve 6'

Hose and Wire Sleeve - Firesleeve - 7/8 in ID - 6 ft - Silicone / Fiberglass - Red - Each

Tubing Oval Section 4in x 3ft

Exhaust Pipe - Straight - Oval - 4.688 in Width x 2.625 in Height - 36 in Long - Steel - Natural - Each

Mild Steel Bent Elbow 4.500 90-Degree

Exhaust Bend - 90 Degree - 4.5 in Diameter - 4.5 in Radius - 16 Gauge - Steel - Natural - Each

Cat Armor 1/4 thk x 8 x 12 in w/ties

Exhaust Shield - Cat Armor - 1/4 in Thick x 8 in Wide x 12 in Long - 1800 Degrees - Locking Ties Included - Aluminized Multi-Layer Cloth - Each

Cold-Gold Sleeve 1-1/4in ID x 3ft

Hose and Wire Sleeve - Cold Gold Sleeve - 1-1/4 in ID - 3 ft Roll - 1100 Degrees - Fiberglass - Gold - Each

Flowtech Raptor Muffler - 2.0in - FLT50050

Muffler - Raptor Turbo - 2 in Inlet - 2 in Outlet - 10 x 4-1/2 in Oval Body - 13 in Long - Steel - Aluminized - Each