Exhaust

3.5in Turn Down

Exhaust Tip - Slip-On - 3.5 in Diameter - 9.75 in Long - Single Wall - Cut Edge - Angled Cut - Turndown Style - Steel - Black Paint - Each

Vibrant Performance 1-1/2in S/S Schedule 10 Pipe Tight Radius 90 Deg

Exhaust Bend - 90 Degree - 1-1/2 in Diameter - Tight Radius - Schedule 10 - Stainless - Each

Pypes Collector Flange 2.5in Stainless Each - PYPHVF10S

Collector Flange - 3-Bolt - 3/8 in Thick - 2-1/2 in ID - Stainless - Each Prop 65

Patriot U-Bend Mild Steel 1.500 x 2in Radius 18 Gauge - PEPH7010

Exhaust Bend - U-Bend - Mandrel - 1-1/2 in Diameter - 2 in Radius - 6 in Legs - 18 Gauge - Steel - Each Prop 65

Schoenfeld 3in Dia. Turn Out - SCH3025

Exhaust Turn Down - 3 in Diameter - 10 in Long - Steel - Each

Schoenfeld Header Tabs No Bolts (12) - SCH4001-12

Header Tabs - Tabs Only - Steel - Set of 12

Heatshield Products HP Builders Kit-Fuel 1/2 in id X 2 ft Roll - HSP204002

Hose and Wire Sleeve - 1/2 in ID - 2 ft Roll - 1100 Degrees - Fiberglass - Black - Each

Vibrant Performance Stainless Steel Exhaust Seal Clamp 4in

Exhaust Clamp - Band Clamp - 4 in Diameter - 1-1/4 in Wide Band - Stainless - Natural - Each

45 Bend Aluminized 2.5id x 2.5od 4in Radius

Exhaust Bend - 45 Degree - 2.5 in Diameter - 4 in Radius - 6 x 6 in Legs - 16 Gauge - Steel - Aluminized - Each

REDUCER 4in OD TO 3in ID X 9in 1

Exhaust Pipe Reducer - 4 in OD to 3 in ID - 9 in Long - Steel - Natural - Each

Thermo-Tec Thermo Flex Heat Shield 1in X 36in - THE17100

Hose and Wire Sleeve - Thermo-Flex - 1 in ID - 3 ft - Aluminized Fiberglass - Silver - Each Prop 65

Thermo-Tec 5/8in- 1in x 3' Thermo Sleeve - THE14010

Hose and Wire Sleeve - Thermo-Sleeve - 17/32 in OD - 3 ft - Aluminized Fiberglass - Silver - 5/8 in to 1 in Components - Each Prop 65